MCU=atmega8a
AVRDUDEMCU=atmega8
CC=avr-gcc
OBJCOPY=avr-objcopy
PROJECT=pokus1
CFLAGS=-g -mmcu=$(MCU) -Wall -Wstrict-prototypes -Os -mcall-prologues

# add simulavr and gtkvawe

all: $(PROJECT).hex $(PROJECT).bin

$(PROJECT).hex : $(PROJECT).elf
        $(OBJCOPY) -R .eeprom -O ihex $(PROJECT).elf $(PROJECT).hex 

$(PROJECT).bin : $(PROJECT).elf
        $(OBJCOPY) -R .eeprom -O binary $(PROJECT).elf $(PROJECT).bin

$(PROJECT).elf : $(PROJECT).o
        $(CC) $(CFLAGS) -o $(PROJECT).elf -Wl,-Map,$(PROJECT).map $(PROJECT).o

$(PROJECT).o : $(PROJECT).c
        $(CC) $(CFLAGS) -c $(PROJECT).c

load: $(PROJECT).hex
        #uisp -dlpt=/dev/parport0 --erase --upload --verify if=$(PROJECT).hex -dprog=dapa  -v=3 --hash=12
        avrdude -c usbasp -p $(AVRDUDEMCU) -U flash:w:$(PROJECT).hex:i

simulate: $(PROJECT).bin
        simulavr -d $(AVRDUDEMCU) -P simulavr-disp $(PROJECT).bin

clean:
        rm -f *.o *.map *.elf *.hex *.bin