Bari Wiki

Uživatelské nástroje

Nástroje pro tento web

Historie: • l800_no_photoprint
troubleshooting:l800_no_photoprint

Obsah

Nefunkční tisk fotek v Linuxu na Epson L800

  • Tiskárnu se podařilo nainstalovat celkem relativně hravě, funguje, tiskne. Netiskne ale fotky.
  • Když dám tisknout nějakou fotku přes celou stránku, tak se to po načtení papíru kousne

Pokus 3 (28.2.2015)

  • díval jsem se na web Epsonu a driver je pořád ve stejné verzi. Neočekávám, že to někdy opraví. Že by to všem ostatním fungovalo?
  • na webu jsou drivery ve formě rpm balíčku. Já jsem ten binární rpm balíček přes alien převedl na deb a nainstaloval.
  • všiml jsem si, že tam mají i src rpm balíček včetně spec souboru.
  • v balíčku jsou dva archívy:
    • epson-injjet-printer-l800-1.0.0.tar.gz (binární, 2 epson proprietární knihovny, nějaké datové soubory)
    • epson-inkjet-printer-filter-1.0.0.tar.gz (zdrojáky, kompilvatelný)
  • druhý archív jsem zkoušel zkompilovat. Šlo to docela hladce.
    • musel jsem doinstalovat libcupsimage2-dev, který instaloval i nějakou binárku
    • configure vyžadoval zadat PREFIX. Je to cesta, kam se pak instaluje výsledný epson_inkjet_printer_filter
    • ano, správně, výsledkem kompilace je soubor epson_inkjet_printer_filter, který mi podle logu z pokusu 2 havaroval s kódem 1 :) Minimálně to teď mohu debugovat :)
    • prefix jsem při kompilaci nastavil na /usr/local. Při make uninstall (bez install) to pak psalo, že nemůže smazat epson_inkjet_printer_filter v /PATH=/usr/local/lib/cups/filter'
  • jako install zkusím na začátek jen přepsat tu binárku
locate epson_inkjet_printer_filter
/opt/epson-inkjet-printer-l800/cups/lib/filter/epson_inkjet_printer_filter

* stále ladím binárku, prefix musí být 

/configure --prefix=/opt/epson-inkjet-printer-l800 --enable-debug
  • posunul jsem se trochu dál, ale stejně to chcípá :)
  • potřeboval bych nějak zapnout ten debug trace, ale nedaří se mi :) určitě to ale jde instalace epsonu v gentoo, a tady
  • poslední stav:
    • funkce epcgStartJob z Epson knihovny vraci -1000 a chova se to stejne jako na tom linku z gentoo
    • backtrace main - printJob -
  • konečně mi funguje ten debug.. musel jsem předělat debuglog funkci, aby používala syslog s LOG_INFO. Nevím proč, ale zápis do souboru mi vůbec nefungoval :)
Mar  1 00:23:22 Pharaon exampleprog[18009]: l800: started
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [printJob:488] TRACE IN
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [load_core_library:165] TRACE IN
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [get_ppd_attr:140] PPD Attribute epcgCoreLibrary -> libEpson_l800.so.1.0.0
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [load_core_library:230] Model name : L800 Series
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [load_core_library:247] TRACE OUT=0
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:254] TRACE IN
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [get_ppd_attr:140] PPD Attribute epcgResourceData -> Epson_l800.1.data
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:302] Job Options =CDDVDPrintPosUpDown=0.0mm Rotate180=Off PrintQuality=BestPhoto DensityWatermark=Level4 SizeWatermark=70 BrightnessValue=0 CDDVDInnerPrintPosition=43mm Watermark=None PageSize=Custom.595.28x841.89 YellowValue=0 InputSlot=Sheet ReduceEnlarge=ByOutputPaperSize MirrorImage=Off OutputPaper=A4 CyanValue=0 PositionWatermark=Center PosterPrinting=Off GammaValue=2.2 ScaleRatio=100 Color=Color MediaType=EULTRAGLOSSY ContrastValue=0 MagentaValue=0 ColurWatermark=Red SaturationValue=0 CDDVDPrintPosLeftRight=0.0mm CorrectionColor=EPSONVivid Borderless=On job-uuid=urn:uuid:6a9465f9-49ca-3b86-7d27-91cd25c7d586 job-originating-host-name=localhost time-at-creation=1425160518 time-at-processing=1425165802
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=MediaType Choice=EULTRAGLOSSY
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=PrintQuality Choice=BestPhoto
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=PageSize Choice=Custom.595.28x841.89
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=InputSlot Choice=Sheet
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=Color Choice=Color
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=Borderless Choice=On
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=ReduceEnlarge Choice=ByOutputPaperSize
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=OutputPaper Choice=A4
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=ScaleRatio Choice=100
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=CDDVDInnerPrintPosition Choice=43mm
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=CDDVDPrintPosUpDown Choice=0.0mm
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=CDDVDPrintPosLeftRight Choice=0.0mm
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=CorrectionColor Choice=EPSONVivid
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=GammaValue Choice=2.2
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=BrightnessValue Choice=0
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=ContrastValue Choice=0
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=SaturationValue Choice=0
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=CyanValue Choice=0
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=MagentaValue Choice=0
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:315] Option=YellowValue Choice=0
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [setup_option:332] TRACE OUT=0
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [printJob:507] Job name : 59
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [printJob:511] epcgStartJob returned -1000
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [unload_core_library:339] TRACE IN
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [unload_core_library:347] TRACE OUT=0
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [printJob:535] TRACE OUT=-1000
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [eps_heap_usage_end:42] =============================================================
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [eps_heap_usage_end:43] HEAP USAGE : max(160 bytes) leak(0 bytes)
Mar  1 00:23:23 Pharaon exampleprog[18009]: l800: [eps_heap_usage_end:44] =============================================================
  • tak už mě opět nic nenapadá :)
  • je dost možné, že jsem se teď dostal do stejného mista jako s originálním binárním souborem. Kontroloval jsem ppd a zjístil, že je umístěn v /usr/share/ppd/Epson/…
  • možná má problém jen s nějakým parametrem v ppd souboru? :)
  • takže, teď mi z toho vyjela i fotka :)
  • celá záhada je tedy možná vyřešena. Vypadá to, že problém byl jen s parametrem borderless
  • když jsem ten parametr zrušil, tak to začalo tisknout v poho
  • blbý je, že mi to netiskne až ke kraji..
  • zkoušel jsem použít a4 bez okrajů a dopadlo to tak, ze se mi asi potiskl válec :)
  • nahoře a vlevo je bílý okraj, dole a vpravo je to až ke kraji, ale oříznuté o ten bílý okraj

Pokus 2 (6.1.2014)

  • všechno smazat, ať tam nejsou zastaralé věci
apt-get purge cups
apt-get --purge autoremove
apt-get install cups
  • + nějaké další purge spojené s cups :)
  • je třeba zajímavé, že jsem měl nainstlaován jak cups, tak cups-bsd
  • tak.. pokus nevyšel…
  • tisk selže…
  • zkoušel jsem tisknout malou fotku na plain papír a to prošlo v pohodě
  • ale na fotopapír, borderless, přes celou stránku.. to už ne :)
  • chtělo by to asi přepnout na debug :) jestli to na sebe něco praskne
E [06/Jan/2014:22:41:16 +0100] [Job 3] Job stopped due to filter errors; please consult the error_log file for details.
D [06/Jan/2014:22:41:16 +0100] [Job 3] The following messages were recorded from 22:41:03 to 22:41:16
D [06/Jan/2014:22:41:16 +0100] [Job 3] Adding start banner page "none".
D [06/Jan/2014:22:41:16 +0100] [Job 3] Adding end banner page "none".
D [06/Jan/2014:22:41:16 +0100] [Job 3] File of type application/pdf queued by "djbuldog".
D [06/Jan/2014:22:41:16 +0100] [Job 3] hold_until=0
D [06/Jan/2014:22:41:16 +0100] [Job 3] Queued on "L800" by "djbuldog".
D [06/Jan/2014:22:41:16 +0100] [Job 3] time-at-processing=1389044463
D [06/Jan/2014:22:41:16 +0100] [Job 3] 3 filters for job:
D [06/Jan/2014:22:41:16 +0100] [Job 3] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [06/Jan/2014:22:41:16 +0100] [Job 3] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [06/Jan/2014:22:41:16 +0100] [Job 3] /opt/epson-inkjet-printer-l800/cups/lib/filter/epson_inkjet_printer_filter (application/vnd.cups-raster to printer/L800, cost 0)
D [06/Jan/2014:22:41:16 +0100] [Job 3] job-sheets=none,none
D [06/Jan/2014:22:41:16 +0100] [Job 3] argv[0]="L800"
D [06/Jan/2014:22:41:16 +0100] [Job 3] argv[1]="3"
D [06/Jan/2014:22:41:16 +0100] [Job 3] argv[2]="djbuldog"
D [06/Jan/2014:22:41:16 +0100] [Job 3] argv[3]="DSC05837.JPG"
D [06/Jan/2014:22:41:16 +0100] [Job 3] argv[4]="1"
D [06/Jan/2014:22:41:16 +0100] [Job 3] argv[5]="CDDVDPrintPosUpDown=0.0mm Rotate180=Off PrintQuality=BestPhoto DensityWatermark=Level4 SizeWatermark=70 BrightnessValue=0 CDDVDInnerPrintPosition=43mm Watermark=None PageSize=Custom.595.28x841.89 YellowValue=0 InputSlot=Sheet ReduceEnlarge=ByOutputPaperSize MirrorImage=Off OutputPaper=A4 CyanValue=0 PositionWatermark=Center PosterPrinting=Off GammaValue=2.2 ScaleRatio=100 Color=Color MediaType=EULTRAGLOSSY ContrastValue=0 MagentaValue=0 ColurWatermark=Red SaturationValue=0 CDDVDPrintPosLeftRight=0.0mm CorrectionColor=EPSONVivid Borderless=On job-uuid=urn:uuid:515fd202-e785-3129-670a-320df9a026c2 job-originating-host-name=localhost time-at-creation=1389044463 time-at-processing=1389044463"
D [06/Jan/2014:22:41:16 +0100] [Job 3] argv[6]="/var/spool/cups/d00003-001"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[8]="HOME=/var/spool/cups/tmp"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[10]="SERVER_ADMIN=root@Pharaon"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[11]="SOFTWARE=CUPS/1.6.4"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[13]="TZ=Europe/Prague"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[14]="USER=root"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[15]="CUPS_MAX_MESSAGE=2047"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[16]="CUPS_SERVER=/var/run/cups/cups.sock"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[17]="CUPS_ENCRYPTION=IfRequested"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[18]="IPP_PORT=631"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[19]="CHARSET=utf-8"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[20]="LANG=cs_CZ.UTF-8"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[21]="PPD=/etc/cups/ppd/L800.ppd"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[22]="RIP_MAX_CACHE=128m"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[23]="CONTENT_TYPE=application/pdf"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[24]="DEVICE_URI=usb://EPSON/L800?serial=5138344B3031373961"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[25]="PRINTER_INFO=EPSON L800"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[26]="PRINTER_LOCATION=Pharaon"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[27]="PRINTER=L800"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[28]="PRINTER_STATE_REASONS=none"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[29]="CUPS_FILETYPE=document"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[30]="FINAL_CONTENT_TYPE=printer/L800"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[31]="AUTH_I****"
D [06/Jan/2014:22:41:16 +0100] [Job 3] Started filter /usr/lib/cups/filter/pdftopdf (PID 29404)
D [06/Jan/2014:22:41:16 +0100] [Job 3] Started filter /usr/lib/cups/filter/gstoraster (PID 29405)
D [06/Jan/2014:22:41:16 +0100] [Job 3] Started filter /opt/epson-inkjet-printer-l800/cups/lib/filter/epson_inkjet_printer_filter (PID 29406)
D [06/Jan/2014:22:41:16 +0100] [Job 3] Started backend /usr/lib/cups/backend/usb (PID 29407)
D [06/Jan/2014:22:41:16 +0100] [Job 3] Loading USB quirks from "/usr/share/cups/usb".
D [06/Jan/2014:22:41:16 +0100] [Job 3] Loaded 67 quirks.
D [06/Jan/2014:22:41:16 +0100] [Job 3] Printing on printer with URI: usb://EPSON/L800?serial=5138344B3031373961
D [06/Jan/2014:22:41:16 +0100] [Job 3] libusb_get_device_list=16
D [06/Jan/2014:22:41:16 +0100] [Job 3] STATE: +connecting-to-device
D [06/Jan/2014:22:41:16 +0100] [Job 3] STATE: -connecting-to-device
D [06/Jan/2014:22:41:16 +0100] [Job 3] Printer found with device ID: MFG:EPSON;CMD:ESCPL2,BDC,D4,D4PX;MDL:L800;CLS:PRINTER;DES:EPSON L800;CID:EpsonStd2; Device URI: usb://EPSON/L800?serial=5138344B3031373961
D [06/Jan/2014:22:41:16 +0100] [Job 3] Device protocol: 2
D [06/Jan/2014:22:41:16 +0100] [Job 3] Sending data to printer.
D [06/Jan/2014:22:41:16 +0100] [Job 3] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [06/Jan/2014:22:41:16 +0100] [Job 3] PID 29404 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [06/Jan/2014:22:41:16 +0100] [Job 3] Calling FindDeviceById(cups-L800)
D [06/Jan/2014:22:41:16 +0100] [Job 3] Found device /org/freedesktop/ColorManager/devices/cups_L800
D [06/Jan/2014:22:41:16 +0100] [Job 3] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [06/Jan/2014:22:41:16 +0100] [Job 3] PPD uses qualifier 'RGB.EULTRAGLOSSY.'
D [06/Jan/2014:22:41:16 +0100] [Job 3] Calling FindDeviceById(cups-L800)
D [06/Jan/2014:22:41:16 +0100] [Job 3] Found device /org/freedesktop/ColorManager/devices/cups_L800
D [06/Jan/2014:22:41:16 +0100] [Job 3] Calling GetProfileForQualifiers(RGB.EULTRAGLOSSY....)
D [06/Jan/2014:22:41:16 +0100] [Job 3] Found profile /org/freedesktop/ColorManager/profiles/L800_RGB__
D [06/Jan/2014:22:41:16 +0100] [Job 3] Calling org.freedesktop.ColorManager.Profile.Get(Filename)
D [06/Jan/2014:22:41:16 +0100] [Job 3] Use profile filename: ''
D [06/Jan/2014:22:41:16 +0100] [Job 3] Using ICC Profile ''
D [06/Jan/2014:22:41:16 +0100] [Job 3] Ghostscript command line: /usr/bin/gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -sDEVICE=cups -sstdout=%stderr -sOutputFile=%stdout -r720x720 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=841 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -dcupsCompression=1 -scupsPageSizeName=Custom -I/usr/share/cups/fonts -c '<</.HWMargins[0.000000 0.000000 0.000000 0.000000] /Margins[0 0]>>setpagedevice' -f -_
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[8]="HOME=/var/spool/cups/tmp"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[10]="SERVER_ADMIN=root@Pharaon"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[11]="SOFTWARE=CUPS/1.6.4"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[13]="TZ=Europe/Prague"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[14]="USER=root"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[15]="CUPS_MAX_MESSAGE=2047"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[16]="CUPS_SERVER=/var/run/cups/cups.sock"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[17]="CUPS_ENCRYPTION=IfRequested"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[18]="IPP_PORT=631"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[19]="CHARSET=utf-8"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[20]="LANG=cs_CZ.UTF-8"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[21]="PPD=/etc/cups/ppd/L800.ppd"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[22]="RIP_MAX_CACHE=128m"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[23]="CONTENT_TYPE=application/pdf"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[24]="DEVICE_URI=usb://EPSON/L800?serial=5138344B3031373961"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[25]="PRINTER_INFO=EPSON L800"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[26]="PRINTER_LOCATION=Pharaon"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[27]="PRINTER=L800"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[28]="PRINTER_STATE_REASONS=none"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[29]="CUPS_FILETYPE=document"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[30]="FINAL_CONTENT_TYPE=printer/L800"
D [06/Jan/2014:22:41:16 +0100] [Job 3] envp[31]="AUTH_INFO_REQUIRED=none"
D [06/Jan/2014:22:41:16 +0100] [Job 3] Start rendering...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Set job-printer-state-message to "Start rendering...", current level=INFO
D [06/Jan/2014:22:41:16 +0100] [Job 3] Processing page 1...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Set job-printer-state-message to "Processing page 1...", current level=INFO
D [06/Jan/2014:22:41:16 +0100] [Job 3] Read 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] PID 29406 (/opt/epson-inkjet-printer-l800/cups/lib/filter/epson_inkjet_printer_filter) stopped with status 1.
D [06/Jan/2014:22:41:16 +0100] [Job 3] Hint: Try setting the LogLevel to "debug" to find out more.
D [06/Jan/2014:22:41:16 +0100] [Job 3] Wrote 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Read 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Wrote 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Read 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Wrote 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Read 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Wrote 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Read 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Wrote 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Read 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Wrote 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Read 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Processing page 2...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Rendering completed
D [06/Jan/2014:22:41:16 +0100] [Job 3] PID 29405 (/usr/lib/cups/filter/gstoraster) exited with no errors.
D [06/Jan/2014:22:41:16 +0100] [Job 3] Wrote 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Read 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Wrote 8192 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Read 94 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Wrote 94 bytes of print data...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Sent 65630 bytes...
D [06/Jan/2014:22:41:16 +0100] [Job 3] Waiting for read thread to exit...
D [06/Jan/2014:22:41:16 +0100] [Job 3] PID 29407 (/usr/lib/cups/backend/usb) exited with no errors.
D [06/Jan/2014:22:41:16 +0100] [Job 3] End of messages
D [06/Jan/2014:22:41:16 +0100] [Job 3] printer-state=3(idle)
D [06/Jan/2014:22:41:16 +0100] [Job 3] printer-state-message="Rendering completed"
D [06/Jan/2014:22:41:16 +0100] [Job 3] printer-state-reasons=none
troubleshooting/l800_no_photoprint.txt · Poslední úprava: autor: 127.0.0.1
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki