Happy pedals XPL issue

X-Plane od 10.10 nepoužívá linuxové rozhraní /dev/input/jsX.
- protože js rozhraní omezuje: podléhá kalibraci, zavádí například null zóny atd…
Místo toho /dev/input/eventX
- https://www.kernel.org/doc/Documentation/input/input.txt
- https://www.kernel.org/doc/Documentation/input/event-codes.txt
vyžaduje oprávnění na eventX
- stačí chmod o+r
- machři to dělají přes udev rule

eventX lze identifikovat podle id nebo path, podle id takto:

Pharaon:/dev/input/by-id# ls -la /dev/input/by-id/
celkem 0
drwxr-xr-x 2 root root 240 zář  3 21:04 .
drw-rw-r-x 4 root root 320 zář  3 20:49 ..
lrwxrwxrwx 1 root root   9 zář  3 20:49 usb-Arduino_LLC_Arduino_Leonardo-event-if02 -> ../event7
lrwxrwxrwx 1 root root   9 zář  3 19:47 usb-Logitech_Gaming_Mouse_G300-event-mouse -> ../event2
lrwxrwxrwx 1 root root   9 zář  3 19:47 usb-Logitech_Gaming_Mouse_G300-if01-event-kbd -> ../event3
lrwxrwxrwx 1 root root   9 zář  3 19:47 usb-Logitech_Gaming_Mouse_G300-mouse -> ../mouse0
lrwxrwxrwx 1 root root   9 zář  3 19:47 usb-Logitech_Logitech_Extreme_3D-event-joystick -> ../event6
lrwxrwxrwx 1 root root   6 zář  3 19:47 usb-Logitech_Logitech_Extreme_3D-joystick -> ../js0
lrwxrwxrwx 1 root root   9 zář  3 19:47 usb-Logitech_USB_Keyboard-event-if01 -> ../event5
lrwxrwxrwx 1 root root   9 zář  3 19:47 usb-Logitech_USB_Keyboard-event-kbd -> ../event4

lsinput

/dev/input/event6
   bustype : BUS_USB
   vendor  : 0x46d
   product : 0xc215
   version : 272
   name    : "Logitech Logitech Extreme 3D"
   phys    : "usb-0000:00:14.0-4/input0"
   uniq    : ""
   bits ev : EV_SYN EV_KEY EV_ABS EV_MSC

/dev/input/event7
   bustype : BUS_USB
   vendor  : 0x2341
   product : 0x8036
   version : 257
   name    : "Arduino LLC Arduino Leonardo"
   phys    : "usb-0000:00:1a.0-1.4/input2"
   uniq    : ""
   bits ev : EV_SYN EV_KEY EV_ABS EV_M

evtest

eventX lze číst přes evtest nástroj
příklad logitech:

Pharaon:/dev/input/by-id# evtest /dev/input/event6
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x46d product 0xc215 version 0x110
Input device name: "Logitech Logitech Extreme 3D"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 288 (BTN_TRIGGER)
    Event code 289 (BTN_THUMB)
    Event code 290 (BTN_THUMB2)
    Event code 291 (BTN_TOP)
    Event code 292 (BTN_TOP2)
    Event code 293 (BTN_PINKIE)
    Event code 294 (BTN_BASE)
    Event code 295 (BTN_BASE2)
    Event code 296 (BTN_BASE3)
    Event code 297 (BTN_BASE4)
    Event code 298 (BTN_BASE5)
    Event code 299 (BTN_BASE6)
  Event type 3 (EV_ABS)
    Event code 0 (ABS_X)
      Value    508
      Min        0
      Max     1023
      Fuzz       3
      Flat      63
    Event code 1 (ABS_Y)
      Value    516
      Min        0
      Max     1023
      Fuzz       3
      Flat      63
    Event code 5 (ABS_RZ)
      Value    128
      Min        0
      Max      255
      Flat      15
    Event code 6 (ABS_THROTTLE)
      Value    213
      Min        0
      Max      255
      Flat      15
    Event code 16 (ABS_HAT0X)
      Value      0
      Min       -1
      Max        1
    Event code 17 (ABS_HAT0Y)
      Value      0
      Min       -1
      Max        1
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
Properties:
Testing ... (interrupt to exit)

happy pedals

Pharaon:/dev/input/by-id# evtest /dev/input/event7
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x2341 product 0x8036 version 0x101
Input device name: "Arduino LLC Arduino Leonardo"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 288 (BTN_TRIGGER)
    Event code 289 (BTN_THUMB)
  Event type 3 (EV_ABS)
    Event code 2 (ABS_Z)
      Value    480
      Min        0
      Max     1023
      Fuzz       3
      Flat      63
    Event code 3 (ABS_RX)
      Value     20
      Min        0
      Max     1023
      Fuzz       3
      Flat      63
    Event code 4 (ABS_RY)
      Value     23
      Min        0
      Max     1023
      Fuzz       3
      Flat      63
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
Properties:
Testing ... (interrupt to exit)

zkoumání xpl

jak X-Plane zjístí seznam events?
- on ví, že jich je max 32, tak to prostě zkusí
- oprávnění určitě měl!! dostal file deskriptor number (a testoval jsem to i přes grep -i permission)

strace /opt/X-Plane\ 10/X-Plane-x86_64 2>&1 | grep -i "/dev/input"

open("/dev/input/event0", O_RDONLY)     = 20
open("/dev/input/event1", O_RDONLY)     = 20
open("/dev/input/event2", O_RDONLY)     = 20
open("/dev/input/event3", O_RDONLY)     = 20
open("/dev/input/event4", O_RDONLY)     = 20
open("/dev/input/event5", O_RDONLY)     = 20
open("/dev/input/event6", O_RDONLY)     = 20
open("/dev/input/event7", O_RDONLY)     = 28
open("/dev/input/event8", O_RDONLY)     = -1 ENOENT (No such file or directory)
open("/dev/input/event9", O_RDONLY)     = -1 ENOENT (No such file or directory)
open("/dev/input/event10", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event11", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event12", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event13", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event14", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event15", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event16", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event17", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event18", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event19", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event20", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event21", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event22", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event23", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event24", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event25", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event26", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event27", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event28", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event29", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event30", O_RDONLY)    = -1 ENOENT (No such file or directory)
open("/dev/input/event31", O_RDONLY)    = -1 ENOENT (No such file or directory)

podle čeho se rozhodne, že se mu eventX líbí?